Sloping Floors
Q: Our home has sloping floors. Part of the house was a pre-fabricated home (52x24) and has been added onto several times. The main area is anywhere from 1/4 inch to 1/2 inch lower than the additions. This will be temporary as we intend to tear the house down in a couple of years and build a new one. How can we fix this, and how do we go about doing it?
A: What I do in a situation like this is install sleepers.
You can use 2x4 material and you scribe it to fit on the floor
to a level mark that one has already marked around the room. One
must allow for 3/4 inch tongue and groove plywood also.
However, this is time consuming and expensive. If you are going to tear the house down in a couple of years, my advice would be to just try to live with it. It will make you appreciate your new house even more.
If you need some professional help to build that new house, visit Home Advisor, become a member (it's free!) and be matched with the ideal service professional in your area.
This information by Greg McGarry of Galerie Construction Co. in Nevada, Texas.
-- Tips courtesy of HomeAdvisor.com